The National Carton Industry Company Obtains the Palestinian Quality Certificate PSI

The National Carton Industry Company obtained the Palestinian Quality Certificate PSI from the Palestinian Standards Institution. Eng. Abdel Nasser Dwaikat,Receive the certificate from the Director General of the Palestinian Standards and Metrology Organization, Eng. Haider Hajja, in the presence of representatives of the two parties at the company's headquarters.
Mr. Dwaikat pointed out that this certificate is the culmination of the company's tireless efforts in continuous development to continue production operations in accordance with the highest international quality standards, through the application of quality systems, in addition to the local specifications issued by the Palestinian Standards Institution, as this is considered a national achievement by all standards. Such certificates would encourage the national product to match international products, and this is the right of the Palestinian consumer over us.
Eng. Haider Hajjah,Said  that granting the National Company a quality certificate came after evaluating and auditing the company’s quality file, in addition to examining the products in accredited laboratories according to the examination program.
Mr. Mahdi Al-Masry, Chairman of the Board of Directors of the National Carton Industry Company, stressed the importance of this certificate, which lies in motivating companies to produce according to the principles of health and safety, optimal use and production in accordance with the standards and methods of good manufacturing.
This achievement also comes in fulfillment of the vision of the company's board of directors, which approved a package of development projects aimed at sustainable development of the company with all its staff, equipment and products.

Leave a Comment

Your email address will not be published. Required fields are marked *

EN

Half Slotted Container (HSC) is similar to Regular Slotted Container without one set of flaps, leaving the top uncovered. All flaps have the same length, and the two outer flaps meet at the center of the box when erected. If a level bottom is required, a fill-in pad can be placed between the two inner flaps.  

Regular slotted Container (RSC) is the typical box construction that results in four flaps on the bottom box opening and four flaps at the top opening

Half Slotted Container (HSC) Same as the Regular Slotted Container without one set of flaps, leaving the top uncovered. All flaps have the same length, and the two outer flaps meet at the center of the box when erected. If a level bottom is required, a fill-in pad can be placed between the two inner flaps.

The Full Overlap (FOL) box is a heavy-duty box for heavy-duty purposes. The flaps on this style extend all the way to the opposite side of the box when folded, completely overlapping each other. This adds stacking and structural strength to the box, making it ideal for storing or shipping heavy items

The custom AFM is a very strong box due to the fact that all flaps meet at the center creating a double layer of the thickness of the custom corrugated board. 

Die cut boxes are highly customizable corrugated cardboard boxes designed to fit any shape, size, or need. They are known as die cut boxes because they are cut from plain sheets of corrugated material on a machine known as a die press (or die cutter)

BOTTOM PUSH LOCK cartons box, with a push lock bottom, no tape required for bottom assemble. Also available in white and a heavy duty stock. 

CARRY PACK:-type boxes consist of basically one piece with a glued, stitched or taped manufacturers joint and top and bottom flaps. They are shipped flat, ready to use and require closing using the flaps provided. 

POTATO BOX  A slotted-type boxes consist of basically one piece with a glued, stitched or taped manufacturers joint and top and bottom flaps. They are shipped flat, ready to use and require closing using the flaps provided.

4 CORNERS GLUED is a telescope-type boxes consist of more than one piece and are characterised by a lid and/or bottom telescoping over the body of the box.

Octabin Jumbo boxes consist of more than one piece and are characterised by a lid and/or bottom telescoping over the body of the box.

Wrap Around case packers: cardboard trays are folded around the product laterally closing by four short flaps. It is the model commonly used for transporting bricks (milk, juice, etc.), tiles and, to a lesser extent, bottles 

Die cut self lock Folder-type boxes and trays usually consist of only one piece of board. The bottom of the box is hinged to form two or all side walls and the cover. Locking tabs, handles, display panels etc., can be incorporated in some designs

Die cut tray self Folder-type boxes and trays usually consist of only one piece of board. The bottom of the box is hinged to form two or all side walls and the cover. Locking tabs, handles, display panels etc., can be incorporated in some designs.

Die cut self lock Folder-type boxes and trays usually consist of only one piece of board. The bottom of the box is hinged to form two or all side walls and the cover. Locking tabs, handles, display panels etc., can be incorporated in some designs.

Tetra Tray Folder-type boxes and trays usually consist of only one piece of board. The bottom of the box is hinged to form two or all side walls and the cover. Locking tabs, handles, display panels etc., can be incorporated in some designs.

Die cut self lock Folder-type boxes and trays usually consist of only one piece of board. The bottom of the box is hinged to form two or all side walls and the cover. Locking tabs, handles, display panels etc., can be incorporated in some designs.

Bottom crush lock box is Ready-glued cases consist of basically one piece, are shipped flat and ready to use by simple setting up.

Crush lock is a ready-glued cases consist of basically one piece, are shipped flat and ready to use by simple setting up.

Sleeve is for Interior fitments such as inside liners, pads, partitions, dividers etc., whether tied to Case Design or as singular items. Any shown number of panels is arbitrary and may be increased or decreased as required.

Regular Slotted Tray is for Interior fitments such as inside liners, pads, partitions, dividers etc., whether tied to Case Design or as singular items. Any shown number of panels is arbitrary and may be increased or decreased as required.

Shelf-ready packaging: SRP and Retail Ready Packaging: [SRP}  refers to the packaging of a product so that it is delivered to a retailer in packaging which is optimized for efficient stocking and sale.