الإدارة التنفيذية

السيد عبد الناصر دويكات

المدير العام

يشغل م. عبد الناصر دويكات منصب المدير العام للشركة الوطنية لصناعة الكرتون منذ كانون ثاني ٢٠١٩، كما تبوأ عدة مناصب في الإدارة التنفيذية في عدة شركات محلية وإقليمية.

يحمل م. دويكات درجة الماجستير في الإدارة الهندسية من فلسطين وألمانيا، ودرجة البكالوريوس في الهندسة الميكانيكية من جامعة النجاح الوطنية.

السيدة هديل أبو كشك

مدير مكتب المدير العام

تتولى السيدة هديل أبو كشك مهام إدارة مكتب المدير العام وتنسيق مواعيده، سعياً لتمكينه من إنجاز مهامه ومسؤولياته. كما تعمل على صياغة محاضر اجتماعات الشركة ومتابعة القضايا الناتجة عنها.


تحمل السيدة أبو كشك درجة البكالوريوس في اللغة الإنجليزية وآدابها، وتمتلك خبرة واسعة في إدارة المكاتب، والترجمة في عدة شركات في فلسطين.

السيد أشرف دروزة

المدير المالي

يعمل السيد أشرف دروزة على مراجعة ومراقبة الاجراءات المالية للشركة واعداد التقارير المالية والمحاسبية بشكل دوري وكذلك القيام بالافصاحات عن البيانات المالية للجهات المختصة وإدارة شؤون المساهمين وتنسيق العلاقة مع المستشار الضريبي للشركة.

السيد دروزة حاصل على بكالوريس علوم مالية ومصرفية – (فرعي محاسبة) من جامعة اليرموك في المملكة الأردنية الهاشمية ، وحاصل على شهادة محاسب اداري معتمد ,CMA من الولايات المتحدة الأمريكية , وقد شغل مناصب عدة في كبرى شركات فلسطين ودول الخليج العربي وشمال افريقيا.

السيد أنس الشايب

مدير المصنع

يعمل السيد أنس الشايب على إدارة المصنع والوحدات الإدارية التابعة له، وذلك بإدارة خطط الإنتاج والعمليات المساندة لها، كما يعتبر مسؤولا عن إدارة كافة عمليات الصيانة في الشركة.

يحمل السيد الشايب درجة البكالوريوس في الهندسة الميكانيكية، ويحمل خبرة عملية في إدارة عمليات الإنتاج والصيانة في عدة شركات فلسطينية.

السيد عاصم دبابسة

مدير التوريدات

يعمل السيد عاصم دبابسة على إدارة كافة عمليات التوريد، والإشراف المباشر عليها ومتابعة تنفيذها بكافة الوسائل. كما يقوم بمتابعة كافة القضايا المتعلقة بسلسلة الإمداد والشؤون اللوجستية للشركة بما في ذلك تجهيز خطط التوريد بما يضمن الكفاءة والفعالية.

يحمل السيد دبابسة درجة البكالوريوس في التمويل والإدارة، وسبق له أن تسلم عدة مناصب في التوريدات والشؤون اللوجستية في فلسطين والإمارات

السيد نمر ضراغمة

مدير دائرة الجودة

يتولى السيد نمر ضراغمة مهام الإشراف والمتابعة على تنفيذ كافة التعليمات والمواصفات المطبقة، وفقا لنظام إدارة الجودة ISO9001:2015، بالإضافة إلى مطابقة كافة المواد المدخلة والناتجة تتوافق مع التعليمات والمواصفات المطلوبة.

يحمل السيد ضراغمة درجة البكالوريوس في الهندسة الصناعية، وسبق أن عمل في عدة شركات فلسطينية.

AR

Half Slotted Container (HSC) is similar to Regular Slotted Container without one set of flaps, leaving the top uncovered. All flaps have the same length, and the two outer flaps meet at the center of the box when erected. If a level bottom is required, a fill-in pad can be placed between the two inner flaps.  

Regular slotted Container (RSC) is the typical box construction that results in four flaps on the bottom box opening and four flaps at the top opening

Half Slotted Container (HSC) Same as the Regular Slotted Container without one set of flaps, leaving the top uncovered. All flaps have the same length, and the two outer flaps meet at the center of the box when erected. If a level bottom is required, a fill-in pad can be placed between the two inner flaps.

The Full Overlap (FOL) box is a heavy-duty box for heavy-duty purposes. The flaps on this style extend all the way to the opposite side of the box when folded, completely overlapping each other. This adds stacking and structural strength to the box, making it ideal for storing or shipping heavy items

The custom AFM is a very strong box due to the fact that all flaps meet at the center creating a double layer of the thickness of the custom corrugated board. 

Die cut boxes are highly customizable corrugated cardboard boxes designed to fit any shape, size, or need. They are known as die cut boxes because they are cut from plain sheets of corrugated material on a machine known as a die press (or die cutter)

BOTTOM PUSH LOCK cartons box, with a push lock bottom, no tape required for bottom assemble. Also available in white and a heavy duty stock. 

CARRY PACK:-type boxes consist of basically one piece with a glued, stitched or taped manufacturers joint and top and bottom flaps. They are shipped flat, ready to use and require closing using the flaps provided. 

POTATO BOX  A slotted-type boxes consist of basically one piece with a glued, stitched or taped manufacturers joint and top and bottom flaps. They are shipped flat, ready to use and require closing using the flaps provided.

4 CORNERS GLUED is a telescope-type boxes consist of more than one piece and are characterised by a lid and/or bottom telescoping over the body of the box.

Octabin Jumbo boxes consist of more than one piece and are characterised by a lid and/or bottom telescoping over the body of the box.

Wrap Around case packers: cardboard trays are folded around the product laterally closing by four short flaps. It is the model commonly used for transporting bricks (milk, juice, etc.), tiles and, to a lesser extent, bottles 

Die cut self lock Folder-type boxes and trays usually consist of only one piece of board. The bottom of the box is hinged to form two or all side walls and the cover. Locking tabs, handles, display panels etc., can be incorporated in some designs

Die cut tray self Folder-type boxes and trays usually consist of only one piece of board. The bottom of the box is hinged to form two or all side walls and the cover. Locking tabs, handles, display panels etc., can be incorporated in some designs.

Die cut self lock Folder-type boxes and trays usually consist of only one piece of board. The bottom of the box is hinged to form two or all side walls and the cover. Locking tabs, handles, display panels etc., can be incorporated in some designs.

Tetra Tray Folder-type boxes and trays usually consist of only one piece of board. The bottom of the box is hinged to form two or all side walls and the cover. Locking tabs, handles, display panels etc., can be incorporated in some designs.

Die cut self lock Folder-type boxes and trays usually consist of only one piece of board. The bottom of the box is hinged to form two or all side walls and the cover. Locking tabs, handles, display panels etc., can be incorporated in some designs.

Bottom crush lock box is Ready-glued cases consist of basically one piece, are shipped flat and ready to use by simple setting up.

Crush lock is a ready-glued cases consist of basically one piece, are shipped flat and ready to use by simple setting up.

Sleeve is for Interior fitments such as inside liners, pads, partitions, dividers etc., whether tied to Case Design or as singular items. Any shown number of panels is arbitrary and may be increased or decreased as required.

Regular Slotted Tray is for Interior fitments such as inside liners, pads, partitions, dividers etc., whether tied to Case Design or as singular items. Any shown number of panels is arbitrary and may be increased or decreased as required.

Shelf-ready packaging: SRP and Retail Ready Packaging: [SRP}  refers to the packaging of a product so that it is delivered to a retailer in packaging which is optimized for efficient stocking and sale.